Deprecated

Gyrid Setup

• Try accessing gyrids via ssh
  • Access gyrid through a serial connection
  • Successful connections used a baud rate of 38400 or 24000, with 8 data bits, no parity bit and 1 stopbit.
• Run setup.sh
• Add ssh keys for future easy access
• Replace /etc/gyrid.conf with this one
• Replace /etc/network/interfaces with this one
• When NTP has run (and so the time is correctly set), run hwclock -w
• If the old gyrid code is used, apply this patch
• Add popen(["/etc/init.d/bluetooth", "restart"]) na dbus restart
• Verwijder wifi lijn in scanmanager